twohubs:
Home > Category > accessories > Campagnolo EPS Power Unit Li-Ion

Campagnolo EPS Power Unit Li-Ion

 
MSRP : $560.00
Price : USD 559.00
Quantity:
Units
The brain of the system, DTI (DigitalTech Intelligence), as well as the battery pack, are inside the Power Unit, the system's source of power. This is the heart, brain and the "right hand" (this controls the motors and their operating power) of Campagnolo electronic drivetrain. 

The main functions of the DTI are: 

  • monitoring and managing the battery pack
  • enabling and monitoring the rear derailleur and derailleur
  • signalling any anomalies through the rgb led
  • communicating with the interface
  • enabling the acoustic buzzer 

Once it has received digital signals from the interface, the Power Unit processes them through a special algorithm and translates them into movement of the rear derailleur and derailleur. The DTI, Digital Tech Intelligence, which is housed inside the Power Unit, continuously monitors the signals that arrive from the interface and the rear derailleur and derailleur, thus managing their operation. 

The Power Unit, along with the interface, also acts as the diagnostic centre of the system, signalling any anomalies in the system through an rgb led and an acoustic buzzer placed in the Power Unit. 

The electronics of the system are housed inside the Power Unit. This strategic choice allowed us to make the system less vulnerable to external agents (such as oil, water, mud and dust) and make it stable even when subjected to significant vibrations, such as those generated by professional athletes on the road of classic north routes.
This way any errors in the system are dramatically limited and the system is guaranteed to function even in extreme conditions, be it weather, be it terrain. In particular, the special case housing the Battery Pack has been produced in a self-extinguishing plastic material (UL94 VØ). 

The DTI is equipped with a number of input/output data ports that allow you to check the system remotely and even update the Firmware and Eprom. 

The BATTERY uses Lithium ion technology and has unprecedented autonomy. The fully-charged system operates at values of 11.1 nominal Volts (a capacity of 950mAh) and 12.6 maximum Volts. 

The autonomy depends on the type of use of the system: in stand-by or in movement. 

In STAND-BY mode the system is able to maintain the charge for up to 6 months, at the end of which the red led on the system will signal that the battery requires charging.
To avoid damaging the battery pack, the system turns off automatically when it reaches 9 Volts, to avoid it from dropping below this voltage.
If it reaches 7.2 Volts, a special circuit inside the battery pack (PCM) turns the battery pack off to avoid absorbing additional energy and thus avoiding damage to the battery pack.
Once this charge level has been reached and if the led indicating the battery level is off, it is advisable to recharge the battery so as to avoid damage to the system. It is advisable to recharge the system a maximum of every 6 months so as to avoid the battery from going flat. 
  • Only compatible with Super Record and Record EPS systems
  • Weathertight, o-ring sealed connectors
  • Water proof to 1m for 30 minutes (IP67 Rated)
  • Operational temperature: -4F to 140F
  • Charging temperature: 32F to 113F
  • Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km